Basic Info.
Frequency Range
9kHz~3GHz/6GHz
Type
Pulse Signal Generator
Frequency Resolution
0.01Hz
Sweep Way
Step Sweep, List Sweep
RF Output Port
Type N Port
Operation Interface
English
Specification
320mm× 150mm × 390mm
Product Description
Techwin RF Signal Generator TW4100
Product Overview:
Techwin TW4100 series signal generator is portable instrument products developed and produced by Techwin(China), provided with portable case structure and featured by small size and convenient operation; with adjustable power output in wide dynamic range; available in complete amplitude modulation (AM), frequency modulation (FM) and pulse modulation functions by coming standards with internal modulation signal generator and internal pulse generator; using English operation interface and large LED TFT LCD.
Techwin TW4100 series signal generator can be used for performance test and failure point location of the receiver in the radar, electronic warfare and communication equipment for convenient test, as well as used as a local oscillator to substitute those in the equipment under test, such as transmitter and receiver, etc., indirectly test for the normality of performance and index of local oscillator signal. In the civilian market, this signal generator can be applied to the R&D, manufacturing of consumer electronic products. As an economical RF signal generator, it is very suitable for teaching and experiment in universities. The portable design of cabinet makes it very suitable for outdoor operations.
Main Features:
--Portable design of cabinet, lightweight, easy to carry
--Frequency range of 9kHz~3GHz/6GHz
--High power output in -127~+10dBm large dynamic range
--Standard internal modulation signal generator and comprehensive AM, FM and pulse modulation functions
--Step sweep and list sweep
--English operation interface, large LED TFT LCD
--Support wide range of AC power input
--With GPIB and LAN interfaces to enable operation under program control
Portable design of cabinet, light weight, easy to carry
Techwin TW4100 series signal generator adopts portable design of cabinet; the size is greatly reduced compared to the ordinary desktop cabinet. The integrated design reduces the weight, which will reduce the burden of outdoor detection and maintenance.
Frequency range of 9kHz~3GHz/6GHz
The frequency range of TW4100 series signal generator is 9kHz~3GHz/6GHz, the lowest frequency of 9kHz can meet your demand for low frequency band.
-127~+10 dBm large dynamic range of power output
This signal generator is provided with a built-in programmable step attenuator. TW4100 series signal generator could output -127dBm signal of min. power level with max output power >+10dBm.
Internal modulation signal generator and comprehensive AM, FM and pulse modulation functions
Techwin TW4100 series signal generator is configured with internal modulation signal generator, which adopts direct digital waveform synthesis technique to generate high-quality modulated signal with 20Hz-100 kHz frequency range and 1Hz resolution and can provide complete analog signals capability, the standard internal pulse generator can meet your test requirements for high-performance pulse source.
English operation interface, large LED TFT LCD
Techwin TW4100 series signal generator uses large screen and English operation interfaces and has a direct and panoramic view of the current state. The operation interface can be switched between English and Chinese for your convenience.
Step sweep and list sweep
Techwin TW4100 series signal generators supports step sweep and list sweep, which will make your test more flexible.
Abundant Interfaces
Techwin TW4100 series signal generator provides RS232, GPIB and LAN interfaces for program control operation and network upgrading function.
Typical Applications:
Local oscillator substitution
With wide output frequency range, Techwin TW4100 series signal generator can be used as local oscillator to substitute those in the equipment under test, such as transmitter and receiver, etc., and indirectly test the normality of performance and index of local oscillator signal.
Receiver performance test
With more than 130dB output dynamic range and 0.01Hz frequency resolution, TW4100 series signal generator can output amplitude modulation signal, frequency modulation signal and pulse modulation signal which are used for performance test and failure point location of the receiver in the radar, electronic warfare and communication equipment for convenient test.
Technical Specifications:
Frequency range | TW4100A: 9kHz ~3GHz
TW4100B: 9kHz ~6GHz | Frequency | N(internal YO fundamental wave frequency division times |
9kHz ≤ f ≤ 250MHz | 4 |
250MHz < f ≤ 400MHz | 16 |
400MHz < f ≤ 800MHz | 8 |
800 MHz < f ≤ 1.6GHz | 4 |
1.6GHz < f ≤ 3.2GHz | 2 |
3.2GHz < f ≤ 6GHz | 1 |
Frequency resolution | 0.01Hz |
Timebase aging rate(typical) | <1×10-9/day, 5×10-7/year (after 30 days of continuous power on) |
Sweep mode | Sweep way | Step sweep, list sweep |
Sweep range | TW4100A:9kHz~3GHz TW4100B:9kHz~6GHz |
Sweep points | 2~1601 |
Dwelling time | 10ms~60s |
Harmonic | Output power less than +5dBm | <30dBc |
Non-harmonic | Output power less than +5dBm, 30kHz offset from carrier | <60dBc |
SSB phase noise | Freq. offset | 20kHz |
TW4100A | 500MHz | <-118dBc/Hz |
1GHz | <-112dBc/Hz |
3GHz | <-104dBc/Hz |
TW4100B | 500MHz | <-118dBc/Hz |
1GHz | <-112dBc/Hz |
3GHz | <-104dBc/Hz |
6GHz | <-98dBc/Hz |
Max. ALC output power (25±10ºC) | >+10dBm |
Power accuracy | ±1.5dB(-50dBm≤output power≤+10dBm) ±2.0dB(-110dBm≤output power<-50dBm) ±3.0dB(-120dBm≤output power<-110dBm) |
Modulation performance | Pulse modulation |
Pulse modulation on/off ratio | 9kHz≤f≤3GHz:>80dB 3GHz < f≤6GHz : > 60dB |
Pulse modulation rise/fall Time | <25ns, output frequency > 250MHz <80ns, Output frequency≤250MHz |
Min. pulse width | ALC loop on:<2μs |
AM | Modulation mode: linear Max. modulation depth: 90% Modulation rate (3 dB bandwidth, 30% mo dulation depth):20Hz~80kHz Accuracy(1kHz modulation rate, demodulati on bandwidth 300Hz~3kHz):±10% |
FM | Max. Frequency modulation offset: >1.6MHz÷N Modulation rate(3dB bandwidth):20Hz~100kHz Accuracy ( 1kHz modulation rate, 2kHz<frequency offset≤1.6MHz÷N, demodulation bandwidth300Hz~3kHz):±10% |
RF output port | Type N port |
Display | 7 inch LED |
Operation interface | English |
Dimensions(W×H×D) | 320mm×150mm ×390mm |
Max. Weight | 9kg |
Operation temperature | 0ºC ~+50ºC |
Power input | 85VAC~264VAC,47~63Hz |
Power consumption | <90W |
Certification
Standard Package
Packaging Details: | Standard Export Carton |
Delivery Detail: | 3~5 days after payment |
Our Service
One to one, heart to heart service, we look forward the long-term continuing services for you, not just one or two times cooperation.
Perfect after-sales service: 24-hour designated telephone number, e-mail and customer manager.
About us
We, Techwin (China) Industry Co., Ltd , are the highly optical fiber machine professional supplier, focusing on Fusion Splicer, OTDR, Optical Fiber Power Meter, Fiber Light Source, Cable Fault Locator, Optical Fiber Identifier, Visual Fault Locator, Optical Fiber Talk Set, PON Power Meter, Optical Variable Attenuator, Optical Tool Kit,PLC Splitter, Fiber Coupler etc.Our products and Service are exported to worldwide(More than 90 Countries and Regions) and we create USD10,000,000 for our annual sales, and continue the rapid growth all the time.
-CE & ISO9001:2000 certified company
-first manufacturer in China
-Products and services are exported to more than 60 countries and religions
-First Class Services and expert quality
-Good after- sales service, One year warranty
Professional technical maintenance personnel and engineers to serve you
Address:
Room 802,Unit A Block B2,206# Zhenghua Road, Hangzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Lights & Lighting, Manufacturing & Processing Machinery, Tools & Hardware
Company Introduction:
We, Techwin (China) Industry Co., Ltd was established in 1998, focusing on Cable and Antenna Analyzer, Vector Signal Generator, Synthesized Signal Generators, Vector Network Analyzer, Spectrum Analyzer, Fusion Splicer, OTDR, Optical Fiber Cable, PLC Splitter, Fiber Coupler, Fiber Cable Identifier, Optical Fiber Power Meter, Fiber Light Source, Optical Fiber Ranger, Optical Fiber Identifier, Visual Fault Locator, Optical Fiber Talk Set, PON Power Meter, Optical Variable Attenuator, Optical Tool Kit etc. Our products and Service are exported to worldwide(More than 60 Countries and Regions) and we create USD10, 000, 000 for our annual sales.
Our Production
Techwin equipment is used by technical and non-technical staff in all phases of manufacture, installation and maintenance. Typical applications are to verify, test, certify and repair fiber optical and wireless systems in telecom, datacom, defense and automotive applications. Our universal connector easily is adapted to a variety of popular connector styles.
Why Choose Us
Currently, communication industry is characterized by increasingly broad deployment of what was once considered a specialist technology. So it is increasingly important that fiber optic and wireless equipment is versatile, economic, reliable and also very easy to use. We also provide professional technical consultation and recommend suitable solutions for your demand and requirement. Therefore, Techwin Industry is the perfect source for your communication solution.
Our Qualification
Techwin has always provided excellent and practical fiber optic and wireless solutions for the industry s needs, and we continue this tradition today. Our high quality test equipment and innovative reporting software provide the best return on investment in the industry, by lowering overall project cost, and improving customer confidence.
Contact Us Today
Technology makes ideas happen and we make your work easier. For more information, please contact us today.